157
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
2. Click to select
Module 1
or
Module 2
.
3. Click the
Edit
button to configure settings.
4. Click the drop-down arrow for
Accept
to
select whether to allow or disallow circuit switched
voice and data calls. The default setting allows
Data only
.
Important Note:
G.711 is the algorithm used when
Voice Only
is selected.
5. Click the drop-down
Network
arrow and select the
Network Type
corresponding to the
region in which you are using the codec (see
for more details).
6. Click the drop-down
Line Type
arrow and select your preferred option. Ask your Telco
whether your ISDN line is Point-to-Point or Point-to-Multipoint. By default select
Point-to-
Multipoint
, unless your switch type is an AT&T 5ESS custom point-to-point.