305
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
Important Notes:
·
Ports are arbitrarily assigned when answering calls using SIP accounts. By default
the UDP audio port range used is from 5004 to 5054. This setting can be adjusted in
the
SIP Interfaces panel
in the HTML5 Toolbox web-GUI. Ensure your firewall has
the required TCP and UDP ports open if you are receiving multiple SIP calls.
·
or multistream program in a codec to ensure it
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
·
Ensure the appropriate TCP and UDP audio ports are open in your firewall to allow
multiple SIP audio streams to connect. See
Installing the Codec at the Studio
for
more information.
·
Failover is not available with SIP and SmartStream PLUS redundant streaming is
not available with SIP or sessionless IP.
20.27
Load, Unload and Dial a Program
A program can be loaded, unloaded and edited using the
Program Manager panel
or the
Connections panel
. Audio stream dialing settings can be edited without unloading a program,
even if other audio streams are concurrently connected. Please note: If you need to use an existing
program as a template for a new program, or add a custom matrix mix to a program, you must use
the
Program Manager panel
to create a program.
Load and Unload a Program
1. Open the HTML5 Toolbox Web-GUI and click
Connect
in the
Menu Bar
, then select
Connections
to launch the
Connections panel
.
2. Select
Programs
and then click the drop-down arrow to select one of the programs in the
codec, then click
Load
.