Home
/
Tieline
/
Genie Distribution
/
User Manual

Tieline Genie Distribution, User Manual, Page: 172 / 426

Share

Page: 172 / 426

Tieline Genie Distribution User Manual Download Page 172

172

Genie Distribution WNET Manual v3

© Tieline Research Pty. Ltd. 2020

3. Click

Save

to confirm the name change.

Important Note:

When the auxiliary input (

AUX IN

) is

On

the default mixer configuration

sends audio to all inputs. If you are not using the auxiliary input ensure it is

Off

to avoid

additional noise in program audio.

Audio Reference Levels

By default, the

PPM METERS

on the front of the codec, or the HTML5 Toolbox Web-GUI, use dBFS

to  express  nominal  operating,  headroom  and  noise  floor  levels.  The  codec  can  also  automatically
adapt  to  different  Tieline  reference  scales.  A  Tieline  codec  with  proprietary  Tieline  session  data
enabled will automatically  adjust  the  reference  level  to  suit  G5  and  G3  codecs,  or  Report-IT.  When
connecting  to  a  non-Tieline  codec,  or  a  Tieline  codec  without  session  data  enabled,  the  codec  will
use the

Tieline G5

reference scale setting.

Important Note:

When dialing a multistream program to both G3 and G5 codecs, by

default the Audio Reference Level will be configured for the compatibility of the codec that
connects first. I.e. if you dial a G3 codec first then the G3 Audio Reference Level will be
configured for all connections.

To adjust this setting:

1. Open the HTML5 Toolbox Web-GUI and click

Settings

in the

Menu Bar

, then click

Options

to display the

Options panel

.

2. Select

Audio

and then click

Edit

.

3. Click the

Reference Level

drop-down menu and select the correct option, then click

Save

.

«
...
170
171
172
173
174
...
»

Summary of Contents for Genie Distribution











































































































































































































































































































































































































































Reviews:

No comments