241
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
20.17
Configure 6 x Mono Peer-to-Peer Dialing Programs
A
6 x Mono Peer-to-Peer
program includes six bidirectional mono audio streams. Each audio
stream is a separate peer-to-peer connection with a different destination codec and each
connection can also be configured with different transport, audio and backup settings.
Important Notes:
In most situations you need to create a dial only program in your
Genie Distribution codec. A compatible codec receiving the call will answer using a
default program. There is no need to create an answering program, however if you require
Output Audio Source
options to be configured on the answering codec (e.g. file
playback), it will be necessary to create an answering program integrating these options.
Configuring 6 x Mono Peer-to-Peer Programs
Important Notes:
Before you start program configuration please note:
·
You cannot edit a program when it is currently loaded in the codec.
·
or multistream program in a codec to ensure it
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
·
Session port 9002 is used by default for all audio streams. If you connect to a G3
codec using IP2 you will need to change the session port on the Genie Distribution
codec to 9012 for the second audio stream connection, as this is used by default on
G3 codecs for IP2.
·
Some drop-down menus and settings may be greyed out intentionally depending on
features available and the transport selected (e.g. IP or ISDN).
·
It is possible to save a program at several points throughout the program wizard and
use default settings to save configuration time.