100
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
still connect and specify different connection parameters such as algorithm preferences and bit rates
via session data.
1. Press the
HOME
button
to return to the
Home
screen.
2. Select
Settings
and press
.
3. Navigate to
System
and press
.
4. Navigate to
Lock Program
and press
to toggle between
Enabled
and
Disabled
.
5. When program lock is
Enabled
a warning message confirms program status.
6. When program lock is
Disabled
a warning message confirms incoming calls may load any
supported factory program.
7. Press the
RETURN
button to exit the warning message.
Important Note:
It is only possible to lock custom programs in a codec. If
Lock
Program
is enabled and you load a new custom program in the codec,
Lock Program
remains enabled and locks the most recently loaded custom program.
18.21
Locking the Front Panel
The codec features a front panel lock feature for tamper-proof operation. This feature is disabled by
default.
There are two levels of panel lock and each requires a user to enter a PIN to access different
features:
1.
Admin PIN
: Required to change codec connection or configuration settings accessed via
the
SETTINGS
button. (Default PIN is: 456789)
2.
User PIN
: Required to use the codec front panel buttons and dial/hangup a connection
(Default PIN is: 123456)
Enabling the Front Panel Lock Feature
1. Press the
SETTINGS
button.
2. Navigate to
System
and press
.
3. Navigate to
Auto Lock
and press
to toggle from
Disabled
to
Enabled
.