339
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
1. Click the first rule in the
Rules panel
titled
Use two local inputs to connect/disconnect a
program
.
2. Click the drop-down arrows to select the control port input used to connect the selected
program, and then select the alternative input used to disconnect the program.
3. Click the drop-down
Program
arrow to select the program to be connected.
4. Check the
Rule summary
and click
Create Rule
to save the settings.
Rule 2: Use a Local Input to Connect/Disconnect a Program
This rule is used to connect and disconnect a selected program when a control port or virtual input
is toggled.
1. Click the second rule in the
Rules panel
titled
Use a local input to connect/disconnect a
program
.
2. Click the drop-down arrows to select the control port input or virtual input used to toggle
connecting and disconnecting a program.
3. Click the drop-down
Program
arrow to select an individual program which will connect and
disconnect when the input is toggled.
4. Check the
Rule summary
and click
Create Rule
to save the settings.