186
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
20.12
Configure 2 Mono Peer-to-Peer Dialing Connections in Genie
Genie STL and Genie Distribution codecs can be configured to send a bidirectional mono feed
between two or three separate codecs over different connections.
Genie Distribution 2 x Mono Peer-to-Peer Configuration
On the dialing codec create a program with two or three separate mono audio streams and
associated dialing connections. Select the
2 x Mono Peer-to-Peer
or
3 x Mono Peer-to-Peer
option from the drop-down menu in the first screen of the program wizard as illustrated in the
following image.
Configure and Dial 2 x Mono Peer-to-Peer Codec Connections
Important Notes:
Before you start program configuration please note:
·
You cannot edit a program when it is currently loaded in the codec.
·
or multistream program in a codec to ensure it
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
·
Some drop-down menus and settings may be greyed out intentionally depending on
features available and the transport selected (e.g. IP or ISDN).
·
It is possible to save audio stream or program settings at several points throughout
the program wizard and use default settings to save configuration time.
·
Failover is not available with SIP and SmartStream PLUS redundant streaming is
not available with SIP or sessionless IP.
·
To learn more about programs see the section titled
1. Open the HTML5 Toolbox Web-GUI and click
Connect
in the
Menu Bar
, then select
Program
Manager
to launch the
Program Manager panel
.
2. Click the
New Program
button to open the wizard and:
·
Click in the text box to name the new program.
·
Click the
Mix
drop-down arrow to associate a custom matrix mix with the program if required.
·
Select
2 x Mono Peer-to-Peer
, or
3 x Mono Peer-to-Peer
, or if you want to use an existing
program as a template, select this option. Then click
Next
.