278
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
Important Note:
See
for detailed information on RS232 data
and see
Enabling Relays and RS232 Data
for more information on relay operations.
7. Configure the multicast IP address and
Local Audio Port
(the same multicast address and port
must be used for both the server and client programs), then specify which IP streaming interface
is used to dial this connection, e.g.
Primary
(port
ETH1
) or
Secondary
(port
ETH2
), then click
Next
. Note: By default
Any
will select
ETH1
if it is available and
ETH2
if it is unavailable.
8. Click the drop-down arrows on the right-hand side of each text box to select the
Encoding
,
Sample rate
,
Bit rate
or
Sample size
options. Click
Next
to continue.
9. Click to configure:
·
Auto Jitter Adapt
and the preferred auto jitter setting using the drop-down arrow for
Buffer
priority
. It is also possible to configure the
Minimum depth
and
Maximum depth
of jitter
over the connection. See
·
Alternatively, select a
Fixed Buffer Level
and enter the
Jitter Depth
, which must be
between 12ms and 5000ms depending on the algorithm you select.
Next, select
Return FEC Enabled
to enable RFC2733 compliant Forward Error Correction, which is
available because multicast connections are sessionless. Follow the instructions in the right-hand
pane. When configuration is complete click
Next
.