281
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
·
File playback will occur automatically if the silence threshold parameters are breached;
if the codec is not connected for any reason file playback will commence. To stop file
playback open the
Connections panel
in the HTML5 Web-GUI, click to select the file
playback connection, then click
Disconnect
.
Configuring Rules
1. To configure new stream level rules click the drop-down arrow and select the preferred option
from those available. Click the blue
Plus symbol
to add a new rule and click the
Minus
symbol
to remove a rule.
2. Click
Save Program
to complete configuration of the program. Alternatively, continue
through the wizard to configure audio streams for
2 x Multicast Client
or
3 x Multicast
Client
or
6 x Mono Multicast Client
programs as required, then click
Save Program
.
3. Click
Finish
to exit the wizard.
4. Configure multicast server and multicast client programs and load all codecs with the
appropriate program.
Select and connect audio streams
Connections panel
, or
using the codec front panel. Dial the
multicast server program connection first and then connect multicast client codec programs
to begin receiving multicast streams.
20.22
Multicast Server and Client Programs
Genie Distribution and Genie Distribution with WheatNet-IP codecs support programs configured with
both multicast client and server capability simultaneously. Simply select the program to support both
server and client capability and configure the program as per the previous instructions in this user
manual.