232
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
3.
Runtime
: The G3 codec will retain runtime settings when answering a call from a
G5 codec.
4.
Custom
: The G3 codec will load a specified profile, e.g. profile 6, which is the first
custom profile number.
Important Notes on G3 Channel Settings
:
This setting is for compatibility with the
Dual Mono
profile in Tieline Commander G3 and
i-Mix G3 codecs. It is designed to configure routing of the audio stream to a specific G3
codec channel consistently.
1.
Auto
(default): The answering codec will route incoming calls on a first come first
served basis.
2.
Channel 1
: The answering codec will always route incoming calls to codec
Channel 1
(left output).
3.
Channel 2
: The answering codec will always route incoming calls to codec
Channel 2
(right output).
5. This audio stream connection in the wizard will configure the codec to connect the first audio
stream. Enter the name of the connection in the text box, then click
Next
.
6. Configure the transport settings for the connection, then click Next. Note: Select
Enable
Auxiliary Data
to enable synchronized out-of-band data in separate packets using any
algorithm.
Important Note:
See
for detailed information on RS232 data
and see
Enabling Relays and RS232 Data
for more information on relay operations.
7. Configure destination codec dialing and encoding settings:
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g.
Primary
(port
ETH1
) or
Secondary
(port
ETH2
). Note: By default
Any
will select
ETH1
if it is available and
ETH2
if it is
unavailable.