146
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
Reorder TieLink Interface Priority
When the codec attempts to connect to a TieLink contact, local interfaces are used in the order
in which they are listed. For example, if both
LAN1
and
Wi-Fi
are configured for use when
dialing a contact, TieLink will attempt to use these interfaces in the order in which they are
listed in the panel. It is possible to reorder local TieLink interface priority in the
TieLink panel
in Toolbox.
1. Click
Edit
in the TieLink panel.
2. Click the
Drag Handle
to the left of an interface to drag and reorder it.
3. Click
Save
to save the new settings.
Configuring TieLink Connections in the Program Manager Panel
Important Note:
The following settings can also be edited in the
Connections panel
.
Include a Codec's Answering Audio Streams in TieLink Contact Lists
A default program will automatically display audio streams as ‘available’ in TieLink and allow
answering of calls from codec 'followers' in a contact list. When creating custom programs, from
an answering perspective the
Program Manager panel
is used to select which answering
streams are "Stream Members" visible within a TieLink contact list. I.e if an answering stream is
'advertised' on TieLink then is becomes an available endpoint for other codecs to dial.
When creating a program select the
Advertise On TieLink
check-box to register answering
audio streams on a loaded program with the TieLink Traversal server. These audio streams will
be visible in TieLink contact lists which include this codec's audio streams. In other words, the
answering audio streams will appear as available to dial (or "Busy" when connected) by other
codec 'followers' in the same contact list.