262
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
·
Ensure you have sufficient connection bandwidth at the local codec to support all
the connections to which you are connecting.
·
SmartStream PLUS and FEC is not available for multi-unicast connections.
·
If a codec is answering more than one mono or stereo multi-unicast connection it is
necessary to create an answering program to suit the answering configuration and
·
To learn more about programs see the section titled
Creating a Multi-Unicast Program
1. Open the HTML5 Toolbox Web-GUI and click
Connect
in the
Menu Bar
, then select
Program
Manager
to launch the
Program Manager panel
.
2. Click the
New Program
symbol to open the wizard and then:
·
Click in the text box to name the new program.
·
Click the
Mix
drop-down arrow to associate a custom matrix mix with the program if required.
·
Select
Multi-unicast
,
2x Multi-unicast
,
3 x Multi-unicast or 6 x Mono Multi-unicast
, or if
you want to use an existing program as a template, select this option. Then click
Next
. Note:
In this example we create a
2 x Multi-unicast
program.
Important Note:
When you decide to use an existing program as a template, the new
program inherits all the settings of the template program and you can adjust these
settings as required by continuing through the program wizard.
3. To configure new program level rules click the drop-down arrow and select the preferred option
from those available. Click the blue
Plus symbol
to add a new rule and click the
Minus
symbol
to remove a rule.
Important Notes for Rules:
·
The codec has 4 physical
CONTROL PORT GPIOs
; 7 Tieline and WheatNet virtual
inputs (1-7); 64 Tieline virtual logic outputs; and, 64 virtual WheatNet logic outputs
(these allow Tieline WheatNet-IP enabled codecs to activate functions across a
WheatNet-IP network). See
·
Virtual inputs 5-7 can be activated by pressing the
F1
button and
KEYPAD
buttons 1-3.