179
© Tieline Research Pty. Ltd. 2020
Genie Distribution WNET Manual v3
Important Notes:
·
SmartStream PLUS redundant streaming over multiple IP interfaces mitigates lost
packets and provides IP network backup if an IP link is lost.
·
Only one SmartStream PLUS connection per audio stream is supported with
uncompressed PCM, or when encoding with aptX Enhanced, G.711 or G.722
algorithms.
·
Two SmartStream PLUS connections are supported per audio stream with Music PLUS
encoding.
·
Up to three SmartStream PLUS connections are supported per audio stream when
encoding using Tieline Music, AAC algorithms, MP2, MP3 and Opus.
·
TieLink only supports one SmartStream PLUS redundant connection for each audio
stream. TieLink also does not support uncompressed PCM connections, or encoding
using aptX Enhanced, G.711 or G.722.
·
To learn more about SmartStream PLUS visit
https://tieline.com/smartstream-plus/
For ISDN connections enter a number and select which B channel to use. Select the
Enable bonded connections
check-box to configure and bond multiple B channels.
Next, click
Save Program
to save the program with default algorithm settings, or click
Next
to specify a different algorithm and configure a backup connection if required.
(recommended).
Dialing settings for this ISDN audio stream are now complete.
Select
POTS Codec
in the
Mode
drop-down menu to encode/decode using POTS, or
select
Analog Phone
to configure a standard analog phone call, then click
Next
.