192
Genie Distribution WNET Manual v3
© Tieline Research Pty. Ltd. 2020
·
Up to three SmartStream PLUS connections are supported per audio stream when
encoding using Tieline Music, AAC algorithms, MP2, MP3 and Opus.
·
TieLink only supports one SmartStream PLUS redundant connection for each audio
stream. TieLink also does not support uncompressed PCM connections, or encoding
using aptX Enhanced, G.711 or G.722.
·
To learn more about SmartStream PLUS visit
https://tieline.com/smartstream-plus/
For ISDN connections enter a number and select which B channel to use. Select the
Enable bonded connections
check-box to configure and bond multiple B channels.
Next, click
Save Program
to save the program with default algorithm settings, or click
Next
to specify a different algorithm and configure a backup connection if required.
(recommended).
Dialing settings for this ISDN audio stream are now complete.
Select
POTS Codec
in the
Mode
drop-down menu to encode/decode using POTS, or
select
Analog Phone
to configure a standard analog phone call, then click
Next
.
Next, enter the phone number of the codec or device you want to dial. When multiple
POTS modules are installed, click the
Via
drop-down menu and select
Module 1
or
Module 2
to specify which POTS module will dial. Next, click
Save Program
to save