manualshive.com logo in svg

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

The Sun Microsystems StorageTek StreamLine SL8500 is a cutting-edge storage solution designed for seamless data management. Enhance your storage operations with our comprehensive Best Practices Manual, providing valuable insights and guidance. Download this manual for free from our website and optimize your experience with this exceptional product.

Share
Download
background image

Introduction

54  SL8500: Systems Assurance Guide  •  July 2011

        E24254-01

■

Regulatory Agencies 

The following regulatory agencies have tested and certified the SL8500 library. 

Safety 

•

Underwriters Laboratories Inc. (UL) - in compliance with UL 60950-1 

First Edition, Standard for Information Technology Equipment - Safety 

Part 1: General Requirements. 

•

Canadian Standards Association (CSA) - in compliance with 

CAN/CSA-C22.2 No. 60950-1-03 First Edition, Standard for Information 
Technology Equipment - Safety - Part 1: General Requirements. 

•

TUV Rheinland (TUV) - in compliance with EN 60950-1 (IEC 60950-
1:2001, modified), Standard for Information Technology Equipment - 
Safety - Part 1: General Requirements. 

•

CB Scheme - in compliance to international Certified Body Scheme 
requirements with all national deviations by TUV Rheinland. 

Electromagnetic 

Configuration used for verification and compliance is an SL8500 Modular 
Library with a TCP/IP connection and 4 to 64 tape drives:

•

Federal Communications Commission (FCC) – in compliance to the 
requirements of FCC 47, Part15, Subpart B and Unintentional Radiators 
Class A. 

•

Voluntary Control Council for Interference (VCCI) (Japan) – in compliance 
to VCCI Class A (Cispr22).

•

Australia/New Zealand (C-Tick Mark) – in compliance to requirements of 
the Australia/New Zealand EMC Framework AS/NZS 3548: 1995 Class A.

•

European Community (CE Mark) – in compliance to the requirements of 
Electromagnetic Compatibility Directive 89/336 (including all 
amendments).

•

Canadian Emissions (ICES) – in compliance to the requirements of 
Canada's Interference Causing Equipment Standard ICES-003 Class A. 

•

Taiwan (BSMI) – in compliance to the requirements of Taiwan’s 
requirements, CNS13438 Class A.

•

Korea – in compliance to the requirements of Korean EMC Law.

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Reviews:

No comments

Related manuals for StorageTek StreamLine SL8500

D-Link Express Ethernetwork DI-704P Quick Install Manual preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 17
NEC HX4500 Configuration Manual preview
HX4500
Brand: NEC Pages: 74
NEC Express5800/T120e Quick Start Manual preview
Express5800/T120e
Brand: NEC Pages: 6
NEC Express5800/T120e Getting Started preview
Express5800/T120e
Brand: NEC Pages: 2
NEC Express5800/T110i Getting Started preview
Express5800/T110i
Brand: NEC Pages: 2
NEC EXPRESS5800/R320d-E4 Configuration Manual preview
EXPRESS5800/R320d-E4
Brand: NEC Pages: 19
NEC Express5800/R320d-M4 Series User Manual preview
Express5800/R320d-M4 Series
Brand: NEC Pages: 98
NEC Express5800/R120h-2M Getting Started preview
Express5800/R120h-2M
Brand: NEC Pages: 2
NEC Express5800/R120f-1E Use Precautions preview
Express5800/R120f-1E
Brand: NEC Pages: 12
NEC Express5800/R120d-1E Hardware Specification preview
Express5800/R120d-1E
Brand: NEC Pages: 2
NEC Express5800/R110i-1 Getting Started preview
Express5800/R110i-1
Brand: NEC Pages: 2
NEC Express5800/R110h-1 System Configuration Manual preview
Express5800/R110h-1
Brand: NEC Pages: 40
NEC Express5800/A2040d Configuration Manual preview
Express5800/A2040d
Brand: NEC Pages: 83
NEC Express5800/320Lc Datasheet preview
Express5800/320Lc
Brand: NEC Pages: 4
NEC Express5800/120Rj-2 Datasheet preview
Express5800/120Rj-2
Brand: NEC Pages: 2
NEC NEAX2000 IVS2 Manual preview
NEAX2000 IVS2
Brand: NEC Pages: 106
NEC Express5800/T120d User Manual preview
Express5800/T120d
Brand: NEC Pages: 153
NEC Express5800/T110g-S User Manual preview
Express5800/T110g-S
Brand: NEC Pages: 128

Brands by name

Popular brands

Load more brands