manualshive.com logo in svg

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

The Sun Microsystems StorageTek StreamLine SL8500 is a cutting-edge storage solution designed for seamless data management. Enhance your storage operations with our comprehensive Best Practices Manual, providing valuable insights and guidance. Download this manual for free from our website and optimize your experience with this exceptional product.

Share
Download
background image

E24254-01        

Chapter 1 Introduction 39

Introduction

Toleration Support for HSC and ELS 

To allow a customer to connect to the SL8500 hardware without 
redundant electronics or Compat 23. 

•

HSC 6.2 PTFs – L1H15HA (MVS)

•

HSC 6.2 PTFs – L1H15H9 (VM) 

•

Enterprise Library Software (ELS) Version 7.0 – L1H15HB (MVS)

Notes:

-

Upgrading library firmware can be disruptive to customer operations. 
Schedule time with the customer to perform this upgrade. 

-

Hosts without the latest level of software (ACSLS or HSC) or without 
the latest PUTs and PTFs will not be able to support the redundant 
electronics feature. 

-

Software and firmware levels can be downloaded and ready in 
advance of activation. When the time and upgrade window are 
available, these upgrades can be activated. 

Preparation can limit down time of the library and operating system. 

Preparation

For full redundancy, two things not included within the redundant electronics 
conversion bill must be done first to prepare the library. 

•

Upgrade of the control software (ACSLS or HSC)

•

Upgrade of the firmware (FRS_6.0)

The third sequence may be done, depending upon you library’s availability.

AC Power

The 2N power configuration supplies the library with redundant AC power. 
Installation instructions for this are separate from the redundant electronics 
conversion bill. 

Library Firmware

Before installing any components for redundant operation, library firmware 
must be at FRS_6.0 or greater. Obtain this firmware from one of the following 
Web sites:

•

http://dlrequest.sfbay.sun.com:88/usr/login (employees) 

•

http://spe.sun.com/spx/control/Login (Authorized service partner)

Controller Card Upgrades 

When possible

, upgrade the HBC and HBT controller cards in preparation for 

the redundant electronics hardware activation. 

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Reviews:

No comments

Related manuals for StorageTek StreamLine SL8500

IBM BladeCenter HS23 Service Manual preview
BladeCenter HS23
Brand: IBM Pages: 36
LaCie LITTLE BIG DISK THUNDERBOLT 2 Getting Connected preview
LITTLE BIG DISK THUNDERBOLT 2
Brand: LaCie Pages: 6
Data General 6045 Series Manual preview
6045 Series
Brand: Data General Pages: 58
Radware APSolute Vision Installation And Maintenance Manual preview
APSolute Vision
Brand: Radware Pages: 81
U-Line H-6581 Quick Start Manual preview
H-6581
Brand: U-Line Pages: 2
I-O DATA HFAS1-XS20U Setup Manual preview
HFAS1-XS20U
Brand: I-O DATA Pages: 49
Hama 104344 Operating Instruction preview
104344
Brand: Hama Pages: 4
IBM xSeries 235 User Manual preview
xSeries 235
Brand: IBM Pages: 66
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
NCR 7702-K260 Kit Instructions preview
7702-K260
Brand: NCR Pages: 10
Ubiquiti EdgeRouter ER-8 Quick Start Manual preview
EdgeRouter ER-8
Brand: Ubiquiti Pages: 20
Moxa Technologies NPort W2150Plus Series User Manual preview
NPort W2150Plus Series
Brand: Moxa Technologies Pages: 167
Compaq 175195-B21 Reference Manual preview
175195-B21
Brand: Compaq Pages: 139
Digital Equipment Prioris Series Manual preview
Prioris Series
Brand: Digital Equipment Pages: 15
OWC RACK PRO MINI-SAS Assembly Manual & User Manual preview
RACK PRO MINI-SAS
Brand: OWC Pages: 12
Belkin F9K1002V1 User Manual preview
F9K1002V1
Brand: Belkin Pages: 42
Hama 55051 Operating Instructions Manual preview
55051
Brand: Hama Pages: 8
IBM SAN768B-2 User Manual preview
SAN768B-2
Brand: IBM Pages: 228

Brands by name

Popular brands

Load more brands