Sun Microsystems StorageTek StreamLine SL8500 System Assurance Manual Download Page 3

Page: 3 / 278

E24254-01

iii

Summary of Changes

Date

Revision

Description

May 2004

First (A)

Initial release

June 2004

Second (B)

Refer to this revision for the list of changes (artwork change)

July 2004

Third (C)

Refer to this revision for the list of changes (power updates)

October 2004

Fourth (D)

Refer to this revision for the list of changes (specifications)

May 2005

Fifth (E)

Refer to this revision for the list of changes (pass-thru port)

September 2005

Sixth (F)

Refer to this revision for the list of changes (handbots and drives)

March 2006

Seventh (G)

Refer to this revision for the list of changes (features)

September 2006

Eighth (H)

Refer to this revision for the list of changes (SPL, TCP/IP)

March 2007

Ninth (J)

Refer to this revision for the list of changes (SPL, Host connectivity)

January 2008

Tenth (K)

Refer to this revision for the list of changes.

January 2010

Tenth (KA)

Refer to this revision for the list of changes.

May 2010

Eleventh (L)

Refer to this revision for the list of changes.

July 2011

Changes to this revision include:

•

Updated with engineering comments

•

Updated marketing order numbers

•

Assigned a new Oracle part number:

E24254-01

Note:

Change bars are included in this revision.

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Search results

Summary of Contents for StorageTek StreamLine SL8500

Reviews:

Related manuals for StorageTek StreamLine SL8500

Brands by name

Popular brands

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

Search results

Summary of Contents for StorageTek StreamLine SL8500

Reviews:

Related manuals for StorageTek StreamLine SL8500

Brands by name

Popular brands