manualshive.com logo in svg

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

The Sun Microsystems StorageTek StreamLine SL8500 is a cutting-edge storage solution designed for seamless data management. Enhance your storage operations with our comprehensive Best Practices Manual, providing valuable insights and guidance. Download this manual for free from our website and optimize your experience with this exceptional product.

Share
Download
background image

Software

146  SL8500: Systems Assurance Guide  •  July 2011

        E24254-01

A default behavior of some tape management software (such as ACSLS) is to 
dismount the drive and leave the cartridge in the same LSM (rail). This 
depends on software features such as fixed volume location, float/no float, or 
extended store. 

Important: 

System administrators and the installers of the library need to be in agreement 
about the placement and location of the tape drives. Placement affects the 
configuration of the software and the performance of the library. 

For example:

 

If a cartridge is in LSM 3 (the bottom rail) and a mount is 

requested on a drive in a different LSM, the HandBot gets the cartridge, 
places it in the elevator (a pass-thru operation), another HandBot retrieves 
the cartridge, and mounts it in the tape drive. 

On dismount, if the software is configured for fixed volume location, the 
HandBot removes the cartridge from the drive, places it in the elevator (a 
pass-thru operation), the HandBot in LSM 3 retrieves the cartridge, and 
puts in back in its original slot. 

Cartridge Access Ports 

The two CAPs service all the LSMs in the library. 

•

When a CAP is in use by one LSM, all 39 Slots  are reserved for that LSM, 
and no other LSMs can access it. 

•

The CAPs cover the size of three LSMs (1,2, and 3); three magazines with 
13-Slots  each. There is no adjacent section in the CAP for the top LSM 
(0), which requires a pass-thru operation with the elevator. 

•

CAP A

 is: 

-

Standard CAP (comes with the library) 

-

Located on the left, with controls on the left side of the keypad 

-

Software address 0 or (ACS, 1, 0) 

•

CAP B

 is: 

-

Optional CAP (must be ordered) 

-

Located on the right, with controls on the right side of the keypad 

-

Software address 1 or (ACS, 1, 1) 

•

For addressing purposes, the CAP needs a location (ACS,LSM,CAP#). 
The LSM of choice is LSM 1, so the CAP addresses are: (ACS, 1, 0) for 
CAP A and (ACS, 1, 1) for CAP B. 

•

When loading cartridges in the CAP, slots  can be skipped or magazines 
can be missing. 

•

If a HandBot is inoperative, that portion of the CAP is inaccessible. 

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Reviews:

No comments

Related manuals for StorageTek StreamLine SL8500

D-Link Express Ethernetwork DI-704P Datasheet preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 2
Canon ColorPASS-Z5000 Printing Manual preview
ColorPASS-Z5000
Brand: Canon Pages: 134
NEC HX4500 Configuration Manual preview
HX4500
Brand: NEC Pages: 74
NEC Express5800/T120e Quick Start Manual preview
Express5800/T120e
Brand: NEC Pages: 6
NEC Express5800/T120e Getting Started preview
Express5800/T120e
Brand: NEC Pages: 2
NEC Express5800/T110i Getting Started preview
Express5800/T110i
Brand: NEC Pages: 2
NEC EXPRESS5800/R320d-E4 Configuration Manual preview
EXPRESS5800/R320d-E4
Brand: NEC Pages: 19
NEC Express5800/R320d-M4 Series User Manual preview
Express5800/R320d-M4 Series
Brand: NEC Pages: 98
NEC Express5800/R120h-2M Getting Started preview
Express5800/R120h-2M
Brand: NEC Pages: 2
NEC Express5800/R120f-1E Use Precautions preview
Express5800/R120f-1E
Brand: NEC Pages: 12
NEC Express5800/R120d-1E Hardware Specification preview
Express5800/R120d-1E
Brand: NEC Pages: 2
NEC Express5800/R110i-1 Getting Started preview
Express5800/R110i-1
Brand: NEC Pages: 2
NEC Express5800/R110h-1 System Configuration Manual preview
Express5800/R110h-1
Brand: NEC Pages: 40
NEC Express5800/A2040d Configuration Manual preview
Express5800/A2040d
Brand: NEC Pages: 83
NEC Express5800/320Lc Datasheet preview
Express5800/320Lc
Brand: NEC Pages: 4
NEC Express5800/120Rj-2 Datasheet preview
Express5800/120Rj-2
Brand: NEC Pages: 2
NEC NEAX2000 IVS2 Manual preview
NEAX2000 IVS2
Brand: NEC Pages: 106
NEC Express5800/T120d User Manual preview
Express5800/T120d
Brand: NEC Pages: 153

Brands by name

Popular brands

Load more brands