Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

Page: 22 / 278

Introduction
2 SL8500: Systems Assurance Guide • July 2011 E24254-01
Modules
Figure 2 shows a view of the library with an example of each type of module
and the location of certain components.
Figure 2. Library Modules
1. “Cartridge Access Ports” on page 20
2. Facade—may contain up to 2 operator panels (Keypad and the Library Console)

The two elevators (vertical pass-thru) are located behind the operator panels).
3. Customer Interface Module (CIM)—only 1 module per library. See “Capacities” on page 7
4. Storage Expansion Modules (SEM)—up to 5 modules per library. See “Capacities” on page 7
5. Robotics Interface Module (RIM)—only 1 module per library. See “Capacities” on page 7
6. Pass-thru Ports—columns 6 and –6. See “Pass-thru Ports” on page 22
7. Drive and Electronics Module (DEM)——only 1 module per library
8. AC Power and Electronics Control Modules—can have two modules per library
9. DC Power supplies—can have up to 24 modules per library
10. Tape drive bay—holds up to 64 tape drives
11. Accessory racks—may have up to 4 racks that can hold servers, network switches, and the SDP
12. Inner wall cartridge slots
13.
“Service Safety Door and Mode” on page 28
14. “Reserved Slot Capacities” on page 9
- E = End stop
- X = Diagnostic cartridges
