manualshive.com logo in svg

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

The Sun Microsystems StorageTek StreamLine SL8500 is a cutting-edge storage solution designed for seamless data management. Enhance your storage operations with our comprehensive Best Practices Manual, providing valuable insights and guidance. Download this manual for free from our website and optimize your experience with this exceptional product.

Share
Download
background image

E24254-01        

Appendix B Software 147

Software

Elevators 

Elevators

 are considered pass-thru ports. Each elevator has three pass-thru 

operations per rail. Each rail can pass-thru to the other three rails. 

Operational Differences 

LSM Prefencing: 

Is basically the same as with other libraries and tries to minimize pass-thru 
operations (elevator, turntable, and pass-thru ports). 

•

Mount scratch tapes — Selects cartridges based on the LSM (rail)

•

Query mount — Orders drives by LSM (rail) proximity 

•

Query mount scratch — Orders drives by LSM (rail) proximity 

•

Enter — Enters cartridge from the CAP to the closest LSM with free Slots  

Limits: 

•

The maximum number of panels in a library is 60. 

Mount 

and

 Dismount Commands: 

You or CSC can still specify a cartridge by VOLID or VOLSER and specific 
drive location. If a cartridge move using a pass-thru operation (elevator) the 
default behavior is for that cartridge to remain in the drive’s LSM. 

Enter 

(Import)

 

and

 Eject 

(Export)

 Commands: 

Library management software normally tries to 

Enter/Import

 a cartridge to an 

LSM (rail) adjacent to the CAP. 

Currently with 

ELS/HSC

, if there are open slots  in the top LSM (00), an 

Enter 

command attempts to place the cartridge in that LSM (00), then work its way 
down. For example: If a cartridge is entered in the second magazine of a CAP, 
and there are open slots in LSM 0, the library performs a pass-thru operation 
with the elevator from the CAP to LSM 0. 

For an 

Eject/Export 

command, the software ejects the cartridge to the CAP 

magazine adjacent to the LSM. For an 

Eject/Export

 command from LSM 0, 

the library performs a pass-thru operation to an open slot in the top magazine 
of the CAP. 

■

Host Software Component 

The StorageTek Host Software Component (HSC) is one type of management 
software that can control the SL8500 library. This software resides in the host 
but is transparent to the operating system. 

HSC receives requests from the programmatic interface and translates them 
into commands that are carried by the control path to the LSM. 

The Storage Management Component (SMC) also resides on the MVS host 
along with HSC and communicates to: 

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Reviews:

No comments

Related manuals for StorageTek StreamLine SL8500

NEC S2500 User Manual preview
S2500
Brand: NEC Pages: 106
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
Patton electronics 3210 Specification Sheet preview
3210
Brand: Patton electronics Pages: 2
Ice-O-Matic B100 Service & Parts Manual preview
B100
Brand: Ice-O-Matic Pages: 9
QNAP TS-130-US User Manual preview
TS-130-US
Brand: QNAP Pages: 39
sysmik ICS-709 Installation Notes For Electrical Personnel preview
ICS-709
Brand: sysmik Pages: 2
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
Seagate Momentus ST9120827AS Product Manual preview
Momentus ST9120827AS
Brand: Seagate Pages: 56
Chieftec CEB-2355S User Manual preview
CEB-2355S
Brand: Chieftec Pages: 18
Rackable Systems OmniStor 4900F Series User Manual preview
OmniStor 4900F Series
Brand: Rackable Systems Pages: 196
Hypercom IN-tact 1201 Brochure & Specs preview
IN-tact 1201
Brand: Hypercom Pages: 2
N-Tron 304TX-N Specifications preview
304TX-N
Brand: N-Tron Pages: 2
Geneko GWR-A362 Quick Start Manual preview
GWR-A362
Brand: Geneko Pages: 8
Seagate Barracuda 36ES2 ST318418N Installation Manual preview
Barracuda 36ES2 ST318418N
Brand: Seagate Pages: 2
Supero SuperServer 6024H-82 User Manual preview
SuperServer 6024H-82
Brand: Supero Pages: 122
Seagate ST9160511NS - Constellation 7200 160 GB Hard Drive Product Manual preview
ST9160511NS - Constellation 7200 160 GB Hard Drive
Brand: Seagate Pages: 46
Billion BiPAC 7401VGP User Manual preview
BiPAC 7401VGP
Brand: Billion Pages: 121
MicroNet DataDock 350 User Manual preview
DataDock 350
Brand: MicroNet Pages: 33

Brands by name

Popular brands

Load more brands