manualshive.com logo in svg

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

The Sun Microsystems StorageTek StreamLine SL8500 is a cutting-edge storage solution designed for seamless data management. Enhance your storage operations with our comprehensive Best Practices Manual, providing valuable insights and guidance. Download this manual for free from our website and optimize your experience with this exceptional product.

Share
Download
background image

Introduction

42  SL8500: Systems Assurance Guide  •  July 2011

        E24254-01

■

Storage Management Component 

Storage Management Component (SMC) is the interface between mainframe 
operating systems and the StorageTek automated library control systems, 
such as HSC and MVS/CSC. SMC’s primary functions are:

•

Influencing tape allocation according to hardware requirements and 
customer policies to ensure that appropriate tape drives are selected. 

•

Intercepting tape management, and operating system mount, dismount, 
and swap messages. Translating them in order to request the required 
tape hardware functions from the appropriate library control system. 

•

Coordinating requests among multiple StorageTek automated libraries.

Note:

SMC must reside on every MVS host that accesses the SL8500 library 
plus real and virtual tape hardware. 

Host Software Component 

When an SL8500 library is in a configuration with an MVS host, the host must 
run a version of the StorageTek Host Software Component (HSC) along with 
the Storage Management Component (SMC) to: 

•

Influence allocations 

•

Intercept mount and dismount messages 

•

Receive requests from the interface and translates them into commands

Minimum Level of Support: 

HSC 6.0

 

with additional PTFs

4

 

or higher is required for the SL8500 library. 

However, new tape drive technologies may require higher levels. 

HSC 6.1 and Near Continuous Operation 

HSC 6.1 added support for the SL8500 libraries called Near Continuous 
Operation (NCO). NCO provides users with the ability to modify their hardware 
configuration dynamically without terminating and restarting HSC. 

It is possible to upgrade the SL8500 configuration without performing a 
LIBGEN, MERGEcds, or stopping and restarting HSC. However, this 
operation requires assistance from StorageTek. Refer to the Host Software 
Component Configuration Guide (such as PN 31259710) for more information.

4.

PTF is a Program Temporary Fix. 

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Reviews:

No comments

Related manuals for StorageTek StreamLine SL8500

G-Technology G-DRIVE mobile USB User Manual preview
G-DRIVE mobile USB
Brand: G-Technology Pages: 13
Gateway 7250R Rack Mounting Instructions preview
7250R
Brand: Gateway Pages: 26
IBM 990 Reference Manual preview
990
Brand: IBM Pages: 88
Basalte CORE PLUS Installation Manual preview
CORE PLUS
Brand: Basalte Pages: 2
Aztech DSL5068EN(1T1R) User Manual preview
DSL5068EN(1T1R)
Brand: Aztech Pages: 40
morse 400A-96-125 Operator'S Manual preview
400A-96-125
Brand: morse Pages: 6
CAAS Audio Digital Audio Server User Manual & Warranty preview
Digital Audio Server
Brand: CAAS Audio Pages: 23
IBM TotalStorage DS4200 Installation, User'S, And Maintenance Manual preview
TotalStorage DS4200
Brand: IBM Pages: 222
Patton IPLink 2603 Series User Manual preview
IPLink 2603 Series
Brand: Patton Pages: 120
LaCie 301542U Quick Install Manual preview
301542U
Brand: LaCie Pages: 22
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
TP-Link TL-SL2226P+ User Manual preview
TL-SL2226P+
Brand: TP-Link Pages: 37
Airlinkplus ASW224 User Manual preview
ASW224
Brand: Airlinkplus Pages: 20
Seagate Exos ST2000NM0075 Product Manual preview
Exos ST2000NM0075
Brand: Seagate Pages: 42
B&B Electronics Vlinx VESR4 4 Series User Manual preview
Vlinx VESR4 4 Series
Brand: B&B Electronics Pages: 70
LevelOne NetCon FBR-1409TX User Manual preview
NetCon FBR-1409TX
Brand: LevelOne Pages: 88
ACE COMPUTERS PW-GT20 User Manual preview
PW-GT20
Brand: ACE COMPUTERS Pages: 32
Impediment RS-1600-X24 User Manual preview
RS-1600-X24
Brand: Impediment Pages: 256

Brands by name

Popular brands

Load more brands