Sun Microsystems StorageTek StreamLine SL8500 System Assurance Manual Download Page 100

Page: 100 / 278

Site Preparation

80 SL8500: Systems Assurance Guide • July 2011

E24254-01

Note:

See

“Shipping Weights and Dimensions” on page 109

for the following questions.

Will there be people available to handle the
number of, size of, and weight of the
shipping pallets?

Yes

❏

Depending on the configuration, there
may be up to 20 pallets.

Will there be equipment available to handle
the pallets (forklifts and/or pallet jacks)?

Yes

❏

Pallets can be up to 2.4 m (8 ft) long.

Is there a

staging area

where the pallets

can be placed with access to the installation
site?

Yes

❏

The minimum working area (

not including

space for the pallets

) is approximately

56 m

(600 ft

Are there doorway or hallway height and
width limitations that may prevent moving
the equipment on the shipping pallets?

Will you need to

unpack

the equipment to

move it to the installation site?

Yes

❏

Yes

❏

Physical Placement (See

Table 39 on page 84

for weights and measurements)

Note:

The library does not require raised

flooring,

but it is highly recommended.



Does the site have raised flooring?



Has the floor been laser-leveled?

Yes

❏

Yes

❏

It is

recommended

that the floor be laser-

leveled

before

receiving any equipment.

Does the customer have floor tile cut-outs
available for AC power, Interface cables,
and vented floor tiles?



See

“Floor Cutouts” on page 94

Yes

❏

Cutouts are placed at the rear corners of
the Drive and Electronics Module. Vented
tiles should be placed in

front

of the

library, not under it.

Does the intended site have enough room
to install and service the equipment?

Yes

❏

See

Table 39 on page 84

for clearance

specifications

Can the customer’s floor support the weight
of the library configuration?

Yes

❏

The customer’s floor must be capable of
supporting 454 kg (1,000 lb) per
distribution pad.

Are there plans for expansion?



If so, when?

How many

slots

does the customer

currently

have?

How many

storage expansion modules

does the customer

currently

have?

Does the customer want to expand with:

•

Additional expansion modules?

•

Pass-thru Ports?

•

More slots?

•

ACSLS license keys

Yes

❏

Date: ______

Slots: _______

SEMs: ______

Yes

❏

Yes

❏

Yes

❏

Slots:______

Can the customer’s floor support the weight
of future expansions?

Yes

❏

See

Table 39 on page 84

. for weights and

measurements

Table 38. Site Planning Checklist (Continued)

Question Answer

Comments

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Search results

Summary of Contents for StorageTek StreamLine SL8500

Reviews:

Related manuals for StorageTek StreamLine SL8500

Brands by name

Popular brands

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

Search results

Summary of Contents for StorageTek StreamLine SL8500

Reviews:

Related manuals for StorageTek StreamLine SL8500

Brands by name

Popular brands