manualshive.com logo in svg

Sun Microsystems StorageTek StreamLine SL8500, System Assurance Manual

The Sun Microsystems StorageTek StreamLine SL8500 is a cutting-edge storage solution designed for seamless data management. Enhance your storage operations with our comprehensive Best Practices Manual, providing valuable insights and guidance. Download this manual for free from our website and optimize your experience with this exceptional product.

Share
Download
background image

Software

150  SL8500: Systems Assurance Guide  •  July 2011

        E24254-01

Presently ACSLS has performance recommendations for utilizing and 
minimizing pass-thru activities: 

•

Minimizing pass-thru activity between LSMs 

•

Floating cartridges during a dismount 

•

Entering cartridges into a library 

•

Ejecting cartridges from a library 

•

Maintaining empty storage cells in a library 

•

Minimizing pass-thru activity with ACSAPI requests 

•

Using ACSAPI requests and ACSLS commands

This information is documented in detail in Appendix C “Improving Library 
Performance,” in the 

ACSLS Installation and Configuration Guide

. 

ACSLS Differences with a SL8500 

There are several differences about how ACSLS operates with the SL8500 
library, these include: 

•

ACSLS considers each SL8500 rail as a separate LSM.

•

ACSLS LSMs are numbered from 0 to 3. 

•

SL8500 CAPs span three rails (2-4). For ACSLS, this is LSMs 1-3. 

Upgrading ACSLS 

You can upgrade directly to ACSLS 7.1 from earlier versions of ACSLS, 
including: 6.1.1 – 6.1 – 6.0.1 – 6.0 – 5.4 – and 5.3.2. 

Refer the 

ACSLS Installation, Configuration, and Administration Guide

 for 

upgrade installation procedures and Appendix C “Improving Library 
Performance.”

■

AS/400 Configuration Requirements 

Requirements for AS/400 to function as another type of management software 
to control the SL8500 library include:

•

RMLS/CSC must be at 1.3.0

 

RMLS/CSC is the client component of ACSLS that runs on the AS/400.  It 
performs the mounts, dismounts, enters, and ejects on the AS/400. This 
product integrates into the tape management systems for the AS/400. The 
tape management systems that RMLS/CSC integrates with are: 

IBM/BRMS, HelpSystems/RobotSave, and LXI/MMS.

•

OS/400 must be at V5R2

 

OS/400 is the operating system that runs on an AS/400 and the iSeries 
platform. (iSeries is interchangeable with AS/400). 

•

ACSLS only supports TCP/IP communications to RMLS/CSC. 

•

SNA (Systems Network Architecture) is not supported. 

Summary of Contents for StorageTek StreamLine SL8500























































































































































































































































































Reviews:

No comments

Related manuals for StorageTek StreamLine SL8500

LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Brand: LaCie Pages: 5
LaCie 301382U Specifications preview
301382U
Brand: LaCie Pages: 6
Konig CMP-HOMEPL1000 Manual preview
CMP-HOMEPL1000
Brand: Konig Pages: 73
Hornington AirStation WHR-G300N Settings preview
AirStation WHR-G300N
Brand: Hornington Pages: 6
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual preview
4-Port 10/100Mbps Ethernet Broadband Router
Brand: AOpen Pages: 41
IESC 12H-2410 User Manual preview
12H-2410
Brand: IESC Pages: 109
Quantum STD2401LW Installation Instructions Manual preview
STD2401LW
Brand: Quantum Pages: 88
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Brand: Patton electronics Pages: 2
Broadband Products D-Link DSL-2640U Quick Installation Manual preview
D-Link DSL-2640U
Brand: Broadband Products Pages: 12
DigiSAFE DiskCrypt Mobile DCM300 User Manual preview
DiskCrypt Mobile DCM300
Brand: DigiSAFE Pages: 27
Supero SUPERSERVER 5017C-MF User Manual preview
SUPERSERVER 5017C-MF
Brand: Supero Pages: 96
Western Digital WDBGLG0010HBK Product Specifications preview
WDBGLG0010HBK
Brand: Western Digital Pages: 2
Nortel Passport 8608GTE Specifications preview
Passport 8608GTE
Brand: Nortel Pages: 10
D-Link DSL-125 Quick Installation Manual preview
DSL-125
Brand: D-Link Pages: 12
IBM X 330 Series Installation Manual preview
X 330 Series
Brand: IBM Pages: 76
morse 185HD SERIES Operator'S Manual preview
185HD SERIES
Brand: morse Pages: 3
Synology SA3600 Hardware Installation Manual preview
SA3600
Brand: Synology Pages: 31
Asus NAS-M25 User Manual preview
NAS-M25
Brand: Asus Pages: 82

Brands by name

Popular brands

Load more brands