Steris RELIANCE 400, Operator'S Manual

Page: 65 / 106

5-13
Cycle and Control Value Programming Operator Manual 122994-513
12. At this point operator has option to either continue in Change
Values mode, or to save values and exit Change Values mode.
• To exit Change Values mode, press SAVE VALUES touch
pad. Control saves changed values and returns screen to
selected Cycle menu.
• To continue in Change Values mode, press CURSOR
arrows (left or right) or VALUE arrows (up or down) to
select function. Press CHANGE VALUES touch pad to con-
firm selection and initiate function program.
5.6 Creating Custom
Cycles
CREATE function of Change Values mode is used to initiate pro-
gramming of custom cycles. This function is only available for a
selected cycle with no programmed treatments. Numbered cycles
(4-10) on the Cycle menu are available for custom programming.
The following procedure and flowchart (see Figure 5-5) show, as an
example, the procedure for creating a new cycle with a Pre-Wash as
the first treatment.
1. Set POWER-OFF/STANDBY switch, located behind printer
door, to POWER . Unit name temporarily appears on screen,
then screen displays first Cycle menu:
__ indicates flashing position
NOTE: To scroll through available Cycle menus, press CYCLE
MENU touch pad.
2. Press SELECT CYCLE touch pad until desired empty cycle
name flashes.
__ indicates flashing position
3. Press CHANGE VALUES touch pad to access Change Values
mode. Printer records:
*CHANGE VALUE 8:44:51A
and display shows:
__ indicates flashing position
To change cycle name, press CURSOR arrows (left or right) to
select position and VALUE arrows (up or down) to select
desired letter, number, punctuation or space. Cycle name can
be a maximum of nine characters, including spaces.
SAVE
VALUES
CHANGE
VALUES
CURSOR VALUE
LIGHT MEDIUM
HEAVY CYCLE 4
LIGHT MEDIUM
HEAVY CYCLE 4
CHANGE CYCLE NAME
CYCLE 6
SELECT
CYCLE
CHANGE
VALUES
CURSOR VALUE