Steris RELIANCE 400, Operator'S Manual

Page: 79 / 106

5-27
Cycle and Control Value Programming Operator Manual 122994-513
5. Press CHANGE VALUES touch pad. Change Values screen
appears:
__ indicates flashing position
6. Press CHANGE VALUES touch pad. Modify Treatment screen
appears:
__ indicates flashing position
Press VALUE arrows (up or down) to select WASH 1.
7. Press CHANGE VALUES touch pad. Select Water Temperature
screen appears:
__ indicates flashing position
8. Press CHANGE VALUES touch pad. Pump Selection screen
appears:
__ indicates flashing position
9. Press CHANGE VALUES touch pad. Detergent to Inject screen
appears:
10. Press CHANGE VALUES touch pad. Select Injection Time
screen appears:
To enter pump injection time, press VALUE arrows (up or down)
to select desired time. Injection time is input in seconds with a
range of 00:20 to 03:00 minutes (see
Table 5-1 , Cycle
Description Chart; contact STERIS or have a qualified service
technician refer to S
ECTION
4, S
ERVICE
M
ODE
P
ROCEDURES
, in
Maintenance Manual [P764330-580]).
MODIFY ADD
REMOVE EXIT
MODIFY TREATMENT
PREWASH
SELECT WATER TEMP
HOT HEATED
PUMP 1 WASH 1
02:00 TMP = 150.0F
DETERGENT TO INJECT?
PUMP1
PUMP 1
INJECT. TIME = 00:45
CHANGE
VALUES
CHANGE
VALUES
VALUE
CHANGE
VALUES
CHANGE
VALUES
CHANGE
VALUES
CHANGE
VALUES
VALUE