Steris RELIANCE 400, Operator'S Manual

Page: 56 / 106

5-4
122994-513 Operator Manual Cycle and Control Value Programming
5.3 Treatment
Sequence and Display
Screens
In Change Values mode, cycles are modified or created by selecting
a treatment, then modifying values on a series of display screens.
Process is repeated for each selected treatment until a customized
cycle is complete.
The six cycle treatment types available occur in a sequential order
which may not be changed. Treatments may be added or removed
entirely from the operating sequence; however, control only allows
placement of treatments that follow normal sequence. For example,
a Pre-Wash treatment added to the cycle always occurs after an
existing Pre-Wash treatment, never after a Wash treatment.
Treatments and corresponding treatment value screens occur in the
following order:
• Pre-Wash (one to four Pre-Wash treatments available):
__ indicates flashing position
followed by:
__ indicates flashing position
• Wash (one to five Wash treatments available):
__ indicates flashing position
followed by:
__ indicates flashing position
followed by:
__ indicates flashing position
• Rinse (one to four Rinse treatments available):
Rinse 1:
__ indicates flashing position
SELECT WATER TEMP.
COLD HOT
PRE-WASH1
XX:XX
SELECT WATER TEMP.
HOT HEATED
PUMP1 WASH1
XX:XX TMP=XXX.XF
DETERGENT TO INJECT?
PUMP1
SELECT WATER TEMP.
COLD HOT HEATED