Steris RELIANCE 400, Operator'S Manual

Page: 59 / 106

5-7
Cycle and Control Value Programming Operator Manual 122994-513
2. Press SELECT CYCLE touch pad until desired cycle name
flashes:
__ indicates flashing position
3. When desired cycle name is flashing, press CHANGE VALUES
touch pad to access Change Values mode. Printer records:
*CHANGE VALUE 8:44:51A
and display shows:
NOTE: When modifying a cycle, note the following:
1) Pressing SAVE VALUES touch pad erases the selected
cycle from control memory. Cycle reverts to a numbered
unprogrammed listing on the Cycle menu.
2) If access code feature is enabled and the selected cycle is
locked out, the access code sequence (see Figure 5-10)
appears after
CHANGE VALUES touch pad is pressed.
3) New value entries must be confirmed by pressing CHANGE
VALUES touch pad. Change Values mode may be exited at any
time by pressing SAVE VALUES touch pad. Control saves con-
firmed values and returns screen to selected Cycle menu.
4. Press CHANGE VALUES touch pad. Change Cycle Name
screen appears:
__ indicates flashing position
5. Press CHANGE VALUES touch pad. Change Values menu
screen appears:
__ indicates flashing position
6. Press CHANGE VALUES touch pad to confirm MODIFY function
selection. Modify Treatment screen appears:
__ indicates flashing position
Press VALUE arrows (up or down) to scroll through treatments
until desired treatment name flashes.
LIGHT MEDIUM
HEAVY CYCLE 4
CVTP = MODIFY CYCLE
SVTP = ERASE CYCLE
CHANGE CYCLE NAME
LIGHT
MODIFY ADD
REMOVE EXIT
MODIFY TREATMENT
PRE-WASH 1
SELECT
CYCLE
CHANGE
VALUES
CHANGE
VALUES
CHANGE
VALUES
CHANGE
VALUES
VALUE