Steris RELIANCE 400, Operator'S Manual

Page: 93 / 106

6-9
Routine Maintenance Operator Manual 122994-513
11. Insert tab of new paper roll into slot of take-up spindle and rotate
spindle to secure paper in slot.
12. Raise platen back up into position and snap in place under
catch.
13. Press take-up spindle back onto drive mechanism and allow
motor to rotate spindle to verify paper is secured to take-up roll.
14. Set POWER-OFF/STANDBY switch to OFF/STANDBY position;
then, to POWER position to verify paper is correctly routed into
mechanism and printer prints. Printer does not print if thermal
paper was placed on wrong side.
15. Close printer door.
Figure 6-1. Changing Printer Paper Roll
Platen
Printer Door
YES
NO