Steris RELIANCE 400, Operator'S Manual

Page: 74 / 106

5-22
122994-513 Operator Manual Cycle and Control Value Programming
5. Press CURSOR arrows (left or right) or VALUE arrows (up or
down) to select EXIT function:
__ indicates flashing position
6. Press CHANGE VALUES touch pad to confirm selection. Modify
Treatment screen appears:
__ indicates flashing position
7. Press VALUE arrows (up or down) to toggle between YES and
NO. Display shows :
__ indicates flashing position
8. Press VALUE arrows (up or down) to toggle between YES and
NO.
9. Press CHANGE VALUES touch pad to confirm rate entry. Print
Cycle Values screen appears:
__ indicates flashing position
NOTE: If printer is disabled, display goes directly to Change
Miscellaneous Values screen.
Press VALUE arrows (up or down) to toggle between YES and
NO. Selecting YES generates a printout of cycle values for the
selected cycle. Selecting NO bypasses printing.
NOTE: Pressing SAVE VALUES and then CHANGE VALUES
touch pads exits Change Values mode and display returns to first
Cycle menu.
10. Press CHANGE VALUES touch pad to confirm answer selec-
tion. Display shows:
__ indicates flashing position
Press VALUE arrows (up or down) to toggle between YES and
NO. Selecting NO exits Change Values mode. Selecting YES
allows operator to change miscellaneous operating values.
MODIFY ADD
REMOVE EXIT
START WITH FRESH H2O
NO
CHANGE INJECT. RATES
NO
PRINT CYCLE VALUES
NO
CHANGE MISC. VALUES?
NO
CURSOR VALUE
CHANGE
VALUES
VALUE
VALUE
CHANGE
VALUES
VALUE
CHANGE
VALUES
VALUE