Steris RELIANCE 400, Operator'S Manual

Page: 60 / 106

5-8
122994-513 Operator Manual Cycle and Control Value Programming
7. Press CHANGE VALUES touch pad to confirm treatment selec-
tion. Pre-Wash Water Temperature Selection screen appears:
__ indicates flashing position
* If option applies.
Press CURSOR arrows (left or right) to toggle between COLD
and HOT.
8. Press CHANGE VALUES touch pad to confirm temperature
selection. Pre-Wash Time Value screen appears:
__ indicates flashing position
To enter Pre-Wash treatment time, press CURSOR arrows (left
or right) to select position and VALUE arrows (up or down) to
select desired number (0-9). Treatment time is input in minutes
and seconds within a range of 0-15 minutes and 0-99 seconds.
9. Press CHANGE VALUES touch pad to confirm time entry.
Change Values menu screen appears:
__ indicates flashing position
10. At this point, operator has option to either continue in Change
Values mode, or to save values and exit Change Values mode.
• To exit Change Values mode, press SAVE VALUES touch
pad. Control saves changed values and returns screen to
selected Cycle menu.
• To continue in Change Values mode, press CURSOR
arrows (left or right) or VALUE arrows (up or down) to
select function. Press CHANGE VALUES touch pad to con-
firm selection and initiate function program.
SELECT WATER TEMP.
COLD* HOT
PRE-WASH 1
XX:XX
MODIFY ADD
REMOVE EXIT
CHANGE
VALUES
CURSOR
CHANGE
VALUES
CURSOR
VALUE
CHANGE
VALUES
SAVE
VALUES
CHANGE
VALUES
CURSOR VALUE