Steris RELIANCE 400, Operator'S Manual

Page: 49 / 106

4-19
Operating Instructions Operator Manual 122994-513
4.11.1 Door Obstruction
If an obstruction is present at bottom of wash chamber door, do not
attempt to remove object. A door safety sensor detects obstruction.
Door automatically stops from closing and opens completely. An
alarm sounds and display shows:
alternating with:
1. Press ALARM REPLY touch pad to silence buzzer.
2. Once door is completely open, carefully remove obstruction from
wash chamber door.
3. Press CYCLE/START touch pad. Door closes and cycle opera-
tion resumes.
ALARM:
DOOR OBSTRUCTION
CYCLE STOPPED
PRESS START TO RESUM
WARNING–PERSONAL INJURY
AND/OR EQUIPMENT DAMAGE
HAZARD:
• If an obstruction is present
in wash chamber door, door
safety sensor will detect
obstruction and door will
automatically stop closing.
Wait until door is fully open
and water flow has stopped
before removing obstruction.
• If an obstruction is present
in wash chamber door and
door is unable to raise, DO
NOT attempt to remove
obstruction from under
door. Door cables may have
loosened which could
cause door to close at high
speed when obstruction is
removed. Call a qualified
service technician to safely
remove an obstruction.
WARNING–PERSONAL INJURY
HAZARD: Risk of pinch point
between door and upper
panel. Do not push on top
portion of doors; do not push
on door when door is rising;
do not push on door when
door is jammed.