Steris RELIANCE 400, Operator'S Manual

Page: 53 / 106

5
5-1
Cycle and Control Value Programming Operator Manual 122994-513
5.1 General
Reliance
®
400 Laboratory Glassware Washer and Reliance
®
500
Laboratory Glassware Washer are programmed at factory for three
operating cycles :
• LIGHT – For processing lightly soiled or delicate items.
• MEDIUM – For processing beakers, bottles and jars.
• HEAVY – For processing heavily soiled beakers, bottles and
jars.
In addition, a DESCALER cycle is programmed at factory to help with
routine maintenance. Refer to
S
ECTION
6, R
OUTINE
M
AINTENANCE
, for
more information.
Cycles include various sequences of treatments :
NOTE: See Table 5-1 , Cycle Description Chart, for treatment specifi-
cations.
• Pre-Wash
• Wash
• Rinse
• Pure Water Rinse
• Drying (option)
Each treatment has time and/or temperature values , some of
which can be modified within a range. To help ensure safe and
effective operation, some pre-set values cannot be modified.
IMPORTANT: A listing of the Safety Precautions to be observed when operating and servicing this
glassware washer can be found in S
ECTION
1 of this manual. Do not operate the equipment until you have
become familiar with this information.
CAUTION – POSSIBLE EQUIP-
MENT DAMAGE: Always select
a cycle appropriate for the
items being processed. Failure
to do so may result in product
damage.
CYCLE AND CONTROL VALUE PROGRAMMING