Steris RELIANCE 400, Operator'S Manual

Page: 70 / 106

5-18
122994-513 Operator Manual Cycle and Control Value Programming
2. Press SELECT CYCLE touch pad until desired cycle name
flashes.
__ indicates flashing position
NOTE: To scroll through available Cycle menus, press CYCLE
MENU touch pad.
3. When desired cycle name is flashing, press CHANGE VALUES
touch pad to access Change Values mode. Printer records:
*CHANGE VALUE 8:44:51A
and following screen appears:
NOTE: When changing a cycle, note the following:
1) Pressing SAVE VALUES touch pad erases selected cycle
from control memory. Cycle reverts to a numbered unpro-
grammed listing on Cycle menu.
2) If access code feature is enabled and selected cycle is
locked out, access code sequence (see Figure 5-10) appears
after
CHANGE VALUES touch pad is pressed.
3) Change Values mode may be exited at any time by pressing
SAVE VALUES touch pad. New value entries must be con-
firmed by pressing CHANGE VALUES touch pad. Control
saves confirmed values and returns screen to selected Cycle
menu.
4. Press CHANGE VALUES touch pad. Change Cycle Name
screen appears:
__ indicates flashing position
IMPORTANT: If Pre-Wash treatment has been deleted, it is not
possible to add a treatment before Wash treatment. Control does
not allow restoring Pre-Wash treatment into cycle. In this case,
erase whole cycle and create a new one starting with a Pre-Wash
treatment so you can add desired treatments after Pre-Wash
treatment.
5. Press CHANGE VALUES touch pad. Change Treatment menu
screen appears:
__ indicates flashing position
LIGHT MEDIUM
HEAVY CYCLE 4
CVTP = MODIFY CYCLE
SVTP = ERASE CYCLE
CHANGE CYCLE NAME
MEDIUM
MODIFY ADD
REMOVE EXIT
SELECT
CYCLE
CHANGE
VALUES
CHANGE
VALUES
CHANGE
VALUES