Steris RELIANCE 400, Operator'S Manual

Page: 42 / 106

4-12
122994-513 Operator Manual Operating Instructions
alternating with:
NOTE: For cycle treatments, note the following:
1) Time displayed on screen counts down remaining time for
treatment in progress. During Final Rinse treatment, count-
down starts only when temperature setpoint is reached.
2) If addition of a powder detergent is programmed for a specific
treatment, powder detergent must be added to sump at
beginning of the treatment. Washer operation automatically
stops
before filling phase, alarm buzzer sounds and display
shows: OPEN LOAD DOOR AND ADD POWDER . Operator
must press ALARM REPLY touch pad, open chamber door
and add recommended quantity of powder detergent. To
resume cycle operation, close door and press
CYCLE/
START touch pad.
then display shows:
alternating with:
then display shows:
alternating with:
LIGHT 150.0F
FILL/INJ TIME = 04:00
LIGHT 150.0F
PUMP1 WASH1
LIGHT 150.0F
CIRCULATE TIME = 01:00
LIGHT 150.0F
PUMP1 WASH1
LIGHT 150.0F
DRAINING TIME = 00:45