Steris RELIANCE 400, Operator'S Manual

Page: 76 / 106

5-24
122994-513 Operator Manual Cycle and Control Value Programming
To enter desired access code, press CURSOR arrows (left or
right) to select position and VALUE arrows (up or down) to
select desired number (0-9). Access code is input as a four-digit
number from 0000 to 9999.
NOTE: If no access code is entered, 0000 is automatically
programmed as access code.
15. Press CHANGE VALUES touch pad to confirm value entry.
Cycle Lockout screen appears:
__ indicates flashing position
To enter locked-out cycle, press CURSOR arrows (left or right)
to select position and VALUE arrows (up or down) to select
desired number (0-9). Cycle to lockout is input as a two-
character number within range of 00-11.
NOTE: Cycles are locked out in sequential order. If one cycle is
locked out, only Cycle 1 requires an operator to enter access
code prior to making cycle changes. If four cycles are locked out,
Cycles 1 through 4 require an access code and Cycles 5 through
10 remain accessible for change by any operator (no access
code required).
16. Press CHANGE VALUES touch pad to confirm value entry. Dis-
play shows:
__ indicates flashing position
17. Press VALUE arrows (up or down) to toggle between YES and
NO. If YES is selected, water is saved for all cycles processed.
18. Press CHANGE VALUES touch pad to return to main Cycle
menu.
CYCLES TO LOCKOUT = 00
WATER SAVER ENABLED
YES
CURSOR VALUE
CHANGE
VALUES
CURSOR VALUE
CHANGE
VALUES
VALUE
CHANGE
VALUES