Steris RELIANCE 400, Operator'S Manual

Page: 64 / 106

5-12
122994-513 Operator Manual Cycle and Control Value Programming
8. Press CHANGE VALUES touch pad to confirm additional treat-
ment is added after selected treatment. Add Treatment screen
appears:
__ indicates flashing position
Press VALUE arrows (up or down) to scroll through treatments
until desired treatment name flashes.
9. Press CHANGE VALUES touch pad to confirm and add selected
treatment to programmed cycle. Treatment Initialization screen
appears:
then Pre-Wash Water Temperature Selection screen appears:
__ indicates flashing position
* If option applies.
Press CURSOR arrows (left or right) to toggle between COLD
and HOT.
10. Press CHANGE VALUES touch pad to confirm temperature
selection. Pre-Wash Time Value screen appears:
__ indicates flashing position
To enter Pre-Wash treatment time, press CURSOR arrows (left
or right) to select position and VALUE arrows (up or down) to
select desired number (0-9). Treatment time is input in minutes
and seconds within a range of 0-15 minutes and 0-99 seconds.
11. Press CHANGE VALUES touch pad to confirm time entry.
Change Values menu screen appears:
__ indicates flashing position
SCROLL TREAT. TO ADD
PRE-WASH
INITIALIZING
TREATMENT...
SELECT WATER TEMP.
COLD* HOT
PRE-WASH 2
XX:XX
MODIFY ADD
REMOVE EXIT
CHANGE
VALUES
VALUE
CHANGE
VALUES
CURSOR
CHANGE
VALUES
CURSOR VALUE
CHANGE
VALUES