Steris RELIANCE 400, Operator'S Manual

Page: 40 / 106

4-10
122994-513 Operator Manual Operating Instructions
4. Press CYCLE/START touch pad to select cycle. Name of
selected cycle appears and remains displayed for a few seconds:
__ indicates flashing position
5. Press CYCLE/START touch pad a second time while cycle
name is displayed.
NOTE: If CYCLE/START touch pad is not pressed a second time
while selected cycle name is displayed, screen automatically
returns to Cycle menu.
Once cycle is started, printer records:
========================
CYCLE - LIGHT
========================
CYCLE START 8:10:58A
CYCLE DATE 94/03/09
CYCLE NUMBER 0000001
UNIT NUMBER 0000000000
MOTOR SPEED = LOW
========================
NOTE: Programmed pump speed is LOW for Reliance 400 and
Reliance 500 without universal shelving system. Programmed
pump speed is HIGH for Reliance 400 or Reliance 500 with uni-
versal shelving system.
6. Cycle proceeds through selected treatments as follows:
NOTE: For cycle treatments, note the following:
1) To extend time of a particular treatment, press EXTEND
CYCLE touch pad while reviewing cycle selection, using
REVIEW CYCLE touch pad (see S
ECTION
4.6, E
XTEND
C
YCLE
T
REATMENT
). This suspends initial time setting and causes
time of the treatment in progress to be multiplied by two.
2) Always use a non-foaming detergent for effective cleaning
and proper pump and water-level control operation. Deter-
gents with a high chloride content should not be used, as
chlorides are harmful to stainless steel. Refer to detergent
specifications in S
ECTION
2.3, D
ETERGENTS AND
C
HEMICAL
A
DDITIVES
S
PECIFICATIONS
.
3) Sump may contain water retained from previous cycle. Refer
to S
ECTION
5, C
YCLE AND
C
ONTROL
V
ALUE
P
ROGRAMMING
, for
information on water save feature.
• Pre-Wash: Load is pre-washed with cold water (maximum 60°F
[16°C]) from building supply line for one minute (factory-setting).
Water is drained.
PRESS START TO
PROCESS - LIGHT
CYCLE
START
CYCLE
START
CAUTION – POSSIBLE EQUIP-
MENT DAMAGE: Always select
a cycle appropriate for the
items being processed. Failure
to do so may result in product
damage.
WARNING–SLIPPING HAZARD:
To prevent slips, keep floors
dry. Promptly clean up any
spills or drippage. For spills
or drippage of detergents or
other chemicals, follow safety
precautions and handling pro-
cedures set forth on deter-
gent or chemical label and/or
Material Safety Data Sheet
(MSDS).
WARNING – CHEMICAL BURN
AND/OR EYE INJURY HAZARD:
Detergents are caustic and
can cause adverse effects to
exposed tissues. Do not get in
eyes, on skin or attempt to
swallow. Read and follow the
precautions and instructions
on the detergent label and in
the Material Safety Data Sheet
(MSDS) prior to handling the
detergent, refilling the deter-
gent container or servicing
the detergent injection pump
and lines. Wear appropriate
Personal Protective Equip-
ment (PPE) whenever han-
dling the detergent or
servicing the detergent injec-
tion pump and lines.