Steris RELIANCE 400, Operator'S Manual

Page: 66 / 106

5-14
122994-513 Operator Manual Cycle and Control Value Programming
Value screen
sequence
corresponds to
selected treatment.
Pressing SAVE SAVE SAVE SAVE SAVE
VALUES VALUES
VALUES VALUES VALUES saves
previously
changed values
and returns
screen to Cycle
menu.
STATUS
Pressing SAVE VALUES SAVE VALUES SAVE VALUES SAVE VALUES SAVE VALUES
saves previously changed
values and returns screen to
Cycle menu.
Confirm
Selection
Confirm
Selection
Press CURSOR CURSOR CURSOR CURSOR CURSOR
arrows to select
water temperature.
STATUS
STATUS
STATUS
SAVE
VALUES
STATUS
STATUS
To Modify
Cycle
Confirm
Selection
Confirm
Selection
STATUS
STATUS
Press CYCLE CYCLE CYCLE CYCLE CYCLE
MENU MENU
MENU MENU MENU to scroll
cycle menus and
SELECT CYCLE
SELECT CYCLE SELECT CYCLE SELECT CYCLE SELECT CYCLE to
select an empty
cycle.
Confirm
Selection
Press VALUE VALUE
VALUE VALUE
VALUE
arrows to select
treatment to be
modified.
STATUS
STATUS
Confirm
Selection
SAVE
VALUES
Go to ADD sequence
EXIT to Misc. Values
STATUS
STATUS
STATUS
CHANGE
VALUES
CHANGE
VALUES
GO TO GO TO GO TO GO TO GO TO
FIGURE 5-7 FIGURE 5-7 FIGURE 5-7 FIGURE 5-7 FIGURE 5-7
SAVE
VALUES
GO TO GO TO
GO TO GO TO GO TO
FIGURE 5-4 FIGURE 5-4 FIGURE 5-4 FIGURE 5-4 FIGURE 5-4
POWER
OFF
STANDBY
Press VALUE arrows VALUE arrows
VALUE arrows VALUE arrows
VALUE arrows
and CURSOR arrows
CURSOR arrows
CURSOR arrows CURSOR arrows CURSOR arrows
to select characters to
modify.
* RELIANCE *
* MODEL 400 *
LIGHT MEDIUM
HEAVY CYCLE 4
CHANGE
VALUES
CVTP=MODIFY CYCLE
SVTP=ERASE CYCLE
CHANGE
VALUES
CHANGE CYCLE NAME
CYCLE 7
CHANGE
VALUES
MODIFY CREATE
REMOVE EXIT
CHANGE
VALUES
SCROLL TREAT. TO ADD
PRE-WASH
CHANGE
VALUES
INITIALIZING
TREATMENT...
SELECT WATER TEMP.
COLD
HOT
CHANGE
VALUES
PRE-WASH 1
01:00
CHANGE
VALUES
MODIFY ADD
REMOVE EXIT
SAVE
VALUES
SAVE
VALUES
To Erase
Cycle
MODIFY ADD
REMOVE EXIT
MODIFY ADD
REMOVE EXIT
LIGHT MEDIUM
HEAVY CYCLE 4
Figure 5-5. Change Values Mode – Creating Custom Cycles