Chapter 2: System Setup
2-33
ZonePlayer 90 Rear Panel Connectors
Analog audio out
(fixed/variable)
Use a standard RCA audio cable to connect the
ZonePlayer’s analog audio outputs to the audio inputs
on a separate audio component, such as an amplifier
or your home theater receiver.
Analog audio in
Use a standard RCA audio cable to connect the audio
outputs from a separate audio component such as a
CD player, to the ZonePlayer’s analog audio inputs.
Subwoofer output
Note:
If you disconnect your
subwoofer, make sure to also
disconnect the subwoofer’s
cable from the ZonePlayer
output.
Connect a powered subwoofer to this output using a
standard RCA cable. The system will detect when a
cable is connected to the subwoofer output and adjust
the crossover frequency automatically.
AC power (mains)
input
Analog audio in
Analog audio out
TOSLINK
digital
audio out
Coaxial
digital
audio out
Ethernet switch connectors