Chapter 2: System Setup
2-7
Step 2: Place ZonePlayers in the rooms of your choice
After connecting one Sonos component to your router, place other ZonePlayers in the
rooms of your choice.
If you are connecting a ZonePlayer 120
1.
Attach speakers to a ZonePlayer 120:
• Your speaker’s power rating should be at least 75W for 8 Ohm speakers, and
at least 150W for 4 Ohm speakers.
Do not connect speakers rated at less
than 4 Ohms.
• Use your thumb or finger to firmly push the spring-loaded speaker connector
post inward to reveal the connection hole.
• Insert the stripped end of the speaker wire into the hole, then release. The
stripped portion should be caught firmly in the connector post.
Note:
Connect the
red
(+)
and
black
(-)
terminals from each speaker to the
corresponding terminals on the ZonePlayer. Mismatching of polarities will result
in weak central sound, and a distorted sense of sound direction.
When making connections, ensure that none of the strands of your speaker
wire come in contact with an adjoining terminal on the rear panel.
