Chapter C: Alternate Sonos System Setup
C-13
component.)
Step 2: Place the other ZonePlayers or ZoneBridges in the rooms of
your choice
• If you are adding a ZonePlayer 120, attach speakers to your ZonePlayer (see
"If you are connecting a ZonePlayer 120" on page 2-8).
• If you are adding a ZonePlayer 90, connect to an external amplified device (see
"Using Line-out" on page 2-24).
• If you are connecting a ZoneBridge, simply apply power.
Step 3: Set up your Sonos system using the Sonos Controller
1.
From the
Welcome
screen on your Sonos Controller, press the
OK
button located
in the center of the scroll wheel.
2.
Follow the Controller’s on-screen prompts to connect your ZonePlayer or
ZoneBridge.
ZoneBridge Setup
•You will be prompted to press and release the
Connect
button on
top of the ZoneBridge. The indicator lights will flash green and white
while the ZoneBridge is connecting.
ZonePlayer Setup
•You will be prompted to press and release the
Mute
and
Volume
Up
buttons simultaneously on the ZonePlayer.
•The
Mute
and
ZonePlayer Status
indicator lights will flash green
and white while the ZonePlayer is connecting. You can release the
buttons as soon as they start to blink (approximately 1 second.)
•When the ZonePlayer has been successfully added to your music
system, the
Mute
indicator will go out and the
ZonePlayer Status
indicator
will change to solid white.
