Sonos Multi-Room Music System User Guide
7-6
If you should miss this message and the Controller’s battery discharges completely,
simply place the Controller into the charging cradle. The Controller’s light sensor will
turn orange, indicating that a reset is in process. It will take a few minutes for the
Controller screen to wake up.
Battery Replacement
After several years (depending upon usage), the battery on your Controller may not
hold a charge as long as it once did. You can purchase a replacement battery (visit
our Web site at
www.sonos.com
for more information), and then follow the
instructions below to replace the battery.
1.
Remove the battery door on the back of your Controller 200.
2.
Remove the existing battery by gently pulling the gray battery tab toward you to
dislodge the battery, and then lift up to remove. (Check with your local waste or
recycling company to determine the proper disposal method in your area.)
3.
Remove the protective wrap from the new battery.
4.
Insert the battery into the battery compartment with the Sonos logo facing out,
making sure the battery snaps gently into place.
5.
Close the battery door.
Slide the battery door
back, and then lift it off
