Sonos Multi-Room Music System User Guide
C-12
"If you are connecting a ZonePlayer 120" on page 2-8) and then apply power.
• If you are adding a ZonePlayer 90, connect to an external amplified device (see
"Using Line-out" on page 2-24) and then apply power.
• If you are connecting a ZoneBridge, simply apply power.
2.
From the
Music
Menu
, touch
Settings
>
Add a Zone
.
3.
Follow the prompts to add more Sonos components to your music system
Step 4: Play some music!
1.
From the
Music
Menu
, choose one of the following options:
• To play music stored on your NAS drive, touch
Music Library
.
• To activate a free music service trial, touch
More Music
. (Your music system
must be registered to activate a trial, so if you have not yet registered, you can
do it now by selecting
Settings
>
Advanced Settings
>
System Registration
.)
• To add a Sonos-compatible music service you already subscribe to, select
Set-
tings
>
More Music
, and then touch
I already have an account
. You will be
prompted to enter your music service user name and password.
To play an Internet radio station, radio show, or podcast, touch
Radio
.
System Setup Using Sonos Controller
100
Step 1: Connect a Sonos component to your router
Connect one ZonePlayer or ZoneBridge to your router using a standard Ethernet
cable (included), and then apply power.
• If you have structured (built-in) wiring that connects to a router located
elsewhere in your home, you can connect the Ethernet cable from a live wall
plate into one of the Ethernet switch connectors on the back of your Sonos
Note:
If you have just purchased a new Sonos Controller CR100, you should
charge the battery. Connect your Sonos Controller to the power adapter using
the adapter cable.
You can use your Controller while it is charging.
