Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 99 / 226

2-33
1010BXFM-3
Section 2
Controlotron Dual Channel BCD
Conforms Operation to user Preferences
Channel /Path Setup
Pipe Data
Gas Parameters
Pick/Install Xdcr
Operation Adjust
Flow/Total Units
Data Span/Set/Cal
Stripchart Setup
Datalogger Setup
I/O Data Control
Diagnostic Data
Dual Channel
Press the <Down Arrow> key and scroll to the [SL Rate] menu cell.
Press the <Right Arrow> key and then the <Up/Down> key to scroll to the desired
Slew Rate resolution. Press the <ENT> key to select it.
Verify [SL Rate] resolution is selected (> symbol will appear to left of menu item).
Using the [Sonilocate] Menu Item
NOTE: The Sonilocator function is only operational with a Controlotron Master Sta-
tion and System 1010 meter.
To access the Sonilocator function proceed as follows:
At the [Meter Type] Menu, press the <Right Arrow> key and then <ENT> to select the
desired Path (e.g., Dual Path Flow).
In the [Dual Path Flow] Menu, press the <Down Arrow> key. Scroll to the [Operation
Adjust] menu cell. Press the <Right Arrow> to select it.
Controlotron Dual Path BCD
Memory/Fault Set Memory
Memory Delay <sec> 120
SL Rate >50 mS
Operation Adjust
Continually press the <Left Arrow> key to return to main menu.
The leak will be located /- 150 meters, providing that:
a. The pressure wave table is able to travel the entire pipeline segment.
b. The magnitude of the pressure transient must be greater that the pressure
fluctuations during normal pipeline operation.
Siemens Hardware