Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 121 / 226

2-55
1010BXFM-3
Section 2
2.9.5 THE APPLICATION INFO MENU
This menu provides a live display of the basic timing data used by meter during operation.
2.9.6 THE LIQUID DATA MENU
This menu shows the current liquid data parameters.
APPLICATION INFO MENU ITEMS
TN uSec The total elapsed time between the transmission and reception of a sonic
pulse.
TL uSec The total time a sonic pulse takes to travel through the liquid.
DeltaT nSec This is the instantaneous result of subtracting the down from the up tran-
sit times. NOTE: This will appear to be more active than dampened
flow readings .
Burst/Sec Number of transmissions per second under current operating conditions.
The following factors influence this parameter: aeration, pressure trans-
ients, signal strength variation.
% Accepted The percentage of accepted up/down transmit burst sets.
Last Makeup Reason for last Makeup (signal reacquisition). Press the meter’s [Help]
key at this menu cell to see a glossary of all the possible reasons for a
Makeup.
Makeup Status Current stage of Makeup routine. [Measurement = normal operation]
TN uSec N/A
TL uSec N/A
DeltaT N/A
Burst/Sec 256
% Accepted 100
Last Makeup N/A
Makeup Status N/A
Controlotron Dual Path
SITE 1 Time between transmit and receive
Application Info
Temp1 78.5
Liquid Name
LiquIdent
1292.80 m/s
ROC 1.05 m/s
Specific Gravity 1.000 S.G.
API 10.000 API
Kg/m3 999.012 Kg/m3
Base SG 1.000 Base S.G.
Base API 10.000 API
Base Kg/m3 999.012 kg/m3
Viscosity cS 1.000
Controlotron Dual Path SITE 1
RTD 1 temperature sensor reading
Liquid Data
Siemens Hardware