Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 112 / 226

2-46
1010BXFM-3 Section 2
2.8 THE I/O DATA CONTROL MENU
This menu becomes available after picking a Meter Type and Channel/Path. Use it to assign
functions for the meter’s analog outputs and optional inputs. The Analog Out Setup assigns
functions to the meter’s current, voltage and pulse rate outputs. Each menu cell presents an
option list of the available data items. In addition, you can set up the alarm relays and enable
and span the analog input ports.
To deselect Datalogger Events:
Move the cursor to the item by pressing and then press
Note that this removes the plus sign (+) from the item.
After selecting all desired items press to leave the [Datalogger Events] option list.
CLR
Analog Output Setup
Relay Setup
Analog Inp Setup
Controlotron Dual Path SITE 1
Assign Data to Analog Outputs
I/O Data Control
Use this menu to assign
data functions to Analog
Outputs.
Use this menu to assign
alarm functions to relay
outputs.
Use this menu to
enable and span
optional Analog
Inputs.
Use this menu to assign a
function to channel Relays.
(continued)
I/O Data Control Analog Output Setup Io1 LiquIdent m/s
API
Kg/m3
Base S.G.
Base API
Base Kg/m
3
Viscosity
T1
ROC
Iin1
Iin2
Vs
Valc
Vaer
Vsg
Io2
*See Io1 option list
Relay Setup Relay 1 Power On
High Liquident
Low Liquident
THE I/O DATA CONTROL MENU STRUCTURE