manualshive.com logo in svg

Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 106 / 226

Share
Download
Siemens SITRANS FUH1010PVX Operating Instructions Manual Download Page 106

                 2-40

1010BXFM-3

Section 2

High Base Kg/m

3

The [High Base Kg/m

3

] menu cell sets the high alarm relay setpoint for kilograms per cubic

meter at base temperature.

Low Base Kg/m

3

The [Low Base Kg/m

3

] menu cell sets the low alarm relay setpoint for kilograms per cubic

meter at base temperature.

Hi Viscosity cS

The [Hi Viscosity cS] menu cell sets the high liquid viscosity alarm relay setpoint. The viscos-

ity units are centistokes with no alternatives offered.

Low Viscosity cS

The [Low Viscosity cS] menu cell sets the low liquid viscosity alarm relay setpoint. The viscos-

ity units are centistokes with no alternatives offered.

High Temperature

The [High Temperature] menu cell sets the high temperature alarm relay setpoint. If metric

units are selected for pipe O.D., etc. the temperature units will be in Centigrade. If English

units are selected, the temperature will be in Fahrenheit.

Low Temperature

The [Low Temperature] menu cell sets the low temperature alarm relay setpoint. If metric

units are selected for pipe O.D., etc. the temperature units will be in Centigrade. If English

units are selected, the temperature will be in Fahrenheit.

Aeration %

The 1010BX surpasses all other transit-time systems in its ability to operate with substantial

aeration (caused by entrained gases, mixing condition or cavitation). Some applications may

require an alarm indication if aeration exceeds a particular level. The meter detects this aera-

tion level and provides this data as an output. The aeration percentage triggers the alarm

relay whenever it meets or exceeds the threshold you set in this menu cell. The aeration

percentage (Vaer %) appears in the [Liquid Data] menu cell of the Diagnostic Data Menu. The

digital display screen also shows the current aeration percentage.

NOTE: Severely aerated conditions may induce meter fault. The 50% default usually

allows enough leeway for continued operation. For intermittent faults, see

memory interval in the Output Control menu.

To set the Aeration % Alarm:

To move the cursor to activate numeric entry press

Use numeric keys or Magnetic Wand to enter the Aeration percentage setpoint.

To store data press

Makeup Latch

A fault condition (caused by an empty pipe or a transient loss of power, etc.) could temporarily

interrupt operation. After recovery from the fault, the meter executes an in-process makeup

ENT

Summary of Contents for SITRANS FUH1010PVX



































































































































































































































Reviews:

No comments