
Installation Instructions
CC129A-7
4
l
After determining the best sheet cutting pattern from suggestions above, mark the
pipe for the starting edge of the dry couplant sheet position.
l
Partially peel the sheet backing 1 to 2 inches from the starting edge, then carefully
locate and press against the pipe surface.
l
While pressing firmly and sliding your hand against the sheet (along the pipe surface),
slowly peel away the backing such that it prevents the trapping of air.
l
Apply the film slowly and carefully so that the sheet does not wrinkle, stretch or over-
lap, especially under the transducer contacting surfaces.
l
Use the wooden hand roller supplied to smooth the film and assure adhesion to the
pipe surface.
l
Apply additional layers (if required) while avoiding any seams under the transducers.
l
Use the wooden hand roller on each layer applied.
l
Record final thickness of CC129-1A (from Table 1) for later entry into the 1010GC flow-
meter.
CN4973 February 2005
ROLL
IN LINE WITH PIPE
AXIS
CC129-1A
WOODEN
ROLLER
Summary of Contents for SITRANS FUH1010PVX
