manualshive.com logo in svg

Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 124 / 226

Share
Download
Siemens SITRANS FUH1010PVX Operating Instructions Manual Download Page 124

                 2-58

1010BXFM-3

Section 2

2.10 TROUBLESHOOTING TIPS

The System 1010BX uses highly reliable circuitry and is designed to provide trouble-free op-

eration within specified environments. Even a well-crafted precision instrument can

fail if exposed to extreme temperature or vibration conditions during service, storage or trans-

portation. The Diagnostic menu shows how the system interprets the problem. The test func-

tions and alarm indicators identify “hidden” problems automatically. If any prob-

lem seems unsolvable, a call to our Technical Service Department or your local Controlotron

Representative will make our expertise available to you.

2.10.1  COMPUTER MESSAGES

Certain actions or conditions invoke messages that may appear as a pop-up window, in the

right-hand column of a given menu cell, or the highlighted prompt line at the top of the dis-

play screen. The following is a list of messages that you may encounter along with explana-

tions, and in some cases, a recommended action.

Makeup

The Test Facilities Menu Makeup routine allows you to command the meter to re-acquire the

operating parameters established during the Initial Makeup routine invoked by the [Install

Completed?] command (see paragraph 2.4 Pick/Install Xdcr).

To invoke the Makeup routine:

Press               to scroll the cursor to [Makeup].

Press        to access the test option list. Press              to move the cursor to [Yes].

Press        to start the makeup routine.

ENT

(continued)

MESSAGE

DESCRIPTION

Memory Full!

     Response to an attempt to save site data, when data memory is

     full. Delete an obsolete site or clear Datalogger memory to make

     room for the new data.

Memory Corrupted!      Memory read error occurred while accessing the active site data.

     Response to an attempt to invoke an operation that requires a

     channel to be enabled. Enable the channel 

[Channel

 

Setup

     Channel Enable    Yes

]. Note that a channel cannot be enabled un-

     til its transducers are operating.

Clr Active Memory?      Response to pressing the F4 key. Use the F4 function to restore

     operation if a severe event (e.g., a violent power surge) disrupts

     system operation.

Chan Not Setup

Summary of Contents for SITRANS FUH1010PVX



































































































































































































































Reviews:

No comments