Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 110 / 226

2-44
1010BXFM-3 Section 2
If you select Alarms, the Datalogger logs the state of each alarm function upon generating
a report. A dash [-] represents an inactive alarm. A letter code represents an active alarm:
Alarm Letter Codes and Descriptions
S....... Spacing ...............Transducer spacing may need re-adjustment.
E ...... Empty ................ Pipe is empty.
F ...... Fault .................. Three continuous seconds without new data update.
A ...... Aeration ............ Current aeration percentage exceeds the alarm setpoint.
M ..... Memory ............. Last valid reading for a selected interval during Fault condition.
K ...... Makeup ............. In-Process Makeup occurred.
I ....... Interface ............ Liquid Vs exceeds interface alarm setpoint.
None Default – Datalogging is disabled.
Site ID You entered this site name when you created the site.
Date The report date according to the meter’s real time clock. (Format: MM.DD.YYYY)
Time The report time according to the meter’s real time clock. (Format: HH.MM)*
Path Vs The sonic velocity of the liquid in either Path 1 or Path 2.
V s The average liquid sonic velocity since the last report.
Path Valc The signal amplitude of the liquid in either Path 1 or Path 2.
Valc The signal strength measured at the time of the report.
Aeration The aeration percentage recorded at the time of the report.
Path Alarms The letter codes of any Path related alarms at the time of the report.
Alarms The letter codes of any alarms active at the time of the report (see below).
S.G Specific Gravity at current operating temperature.
Base S.G. Specific Gravity referenced to user selected temperature.
API# API number at current operating temperature.
Base API# API number referenced to user selectable temperature.
Kg/m3 Kilograms per cubic meter at current operating temperature.
Base Kg/m3 Kilograms per cubic meter referenced to user selectable temperature.
Temperature The current instantaneous liquid temperature.
Delta T (uSecs) The Up to Down transit-time difference measured at the time of the report.
Analog Inputs Allows the device to accept analog data from external devices (i.e., pressure, temperature)
Sonilocate Detects a sudden drop in pipe pressure. The Vs decrease is detected and time-stamped.
DATALOGGER DATA OPTION LIST
*The Time field expands to HH.MM.SS when you select a logging interval of more than once per minute.
Datalogger Setup LogTime Interval 4 Hr.
6 Hr.
12 Hr.
24 Hr.
Demand
Datalog Events None
Relay 2
Relay 1
Spacing
Empty
Aeration
ROC
Fault Alarm
Memory
Makeup
THE DATALOGGER SETUP MENU STRUCTURE (continued)